增加双路调光灯

product/deviceconfig.md

@@ -699,7 +699,7 @@ Authorization: Bearer {{key}}
   {
     "id": "1", "pid": "1","area_id": "区域ID", "area": "区域名称", "name": "0001", "display_name": "调光灯",
     "type":    "lightdim",//调光灯，
-    "subtype":    "dimming_single", //"dimming_single", "单路调光灯" /"dimming_double", "双路调光灯"/ "dimming_color_temp", "调亮度调色温灯",
+    "subtype":    "dimming_color_temp", //"dimming_single", "单路调光灯" /"dimming_double", "双路调光灯"/ "dimming_color_temp", "调亮度调色温灯",
     "opr": "操作模式", // addOrUpd 添加或者更新 |del 删除
     "config":  
     {
@@ -747,6 +747,33 @@ Authorization: Bearer {{key}}
     }
   },
   {
+    "id": "1", "pid": "1","area_id": "区域ID", "area": "区域名称", "name": "0001", "display_name": "调光灯",
+    "type":    "lightdim",//调光灯，
+    "subtype":    "dimming_double", //"dimming_single", "单路调光灯" /"dimming_double", "双路调光灯"/ "dimming_color_temp", "调亮度调色温灯",
+    "opr": "操作模式", // addOrUpd 添加或者更新 |del 删除
+    "config":  
+    {
+        "bus":"canbus",
+        "address": "01", 
+        "control_type": "protocol",//protocol协议类型，relay为继电器,dimming_0_10V 0到10V调光，protocol_yunhai 云海协议调光
+        // 忽略:0x00 单位是秒面板的开关按键生效，如果只是调节亮度色温，启动关闭时间为0x00忽略此时间
+        // 立即更新到设定值此时间为亮度0~100%的时间，控制器每200ms执行一次，
+        // 需要根据当前值进行计算到设定值需要执行多少次，比如设定启动时间为2S，则每次执行增加为10%，
+        // 设定亮度55%，则需要执行6次到达设定值，色温也是一样的计算方式
+        "gradient_time": "0",//延时调光时间，单位为秒，此时间为从0调到100的总时间，具体调节按上面注释计算
+        "control_bits": [
+                 {
+                   "name":"brightness_w_port", //白光端口号
+                   "value":"1",//端口号
+                 },
+                  {
+                   "name":"brightness_y_port", //暖光端口号
+                   "value":"2",//端口号
+                 },
+              ],
+    }
+  },
+  {
     "id": "1", "pid": "1","area_id": "区域ID", "area": "区域名称", "name": "0001", "display_name": "灯光",
     "type":    "lightrgb",//彩光灯，
     "subtype":    "lightrgb_common", // "lightrgb_common", "彩灯"/"lightrgb_rgbw", "带白光彩灯"